SN74ALS151DRE4
| Parameters | |
|---|---|
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Family | ALS |
| Number of Inputs | 8 |
| Current - Output High, Low | 2.6mA 24mA |
| Supply Type | Single |
| Bandwidth | 75MHz |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 24 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
SN74ALS151DRE4 Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).In this case, it is packaged as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The analog IC in the multiplexers is identified as Multiplexer.The operating temperature of 0°C~70°C will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sSince they are members of the 74ALS series, they can be used in a wide variety of applications.It is designed with 16 terminations as part of its basic configuration.There is a base part number 74ALS151 that can be used to locate signal switch's related components as well.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a supply type of Single employed as part of this supply.A total of 16 pins are configured on this board.It is positioned in the direction of Surface Mount.The logic switch object belongs to the family of ALS.Signal multiplexer contains 8 bits.Vsup should be kept at 4.5V to prevent some unnecessary failures.It is advisable that the maximal supply voltage (Vsup) remains at 5.5V to avoid some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.As a result, the turn signal switch consists of 1 outputs.The multiplexer is equipped with 8 inputs.The signal switching is packaged by TR.
SN74ALS151DRE4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
SN74ALS151DRE4 Applications
There are a lot of Texas Instruments SN74ALS151DRE4 Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- RF-based home automation system
- Analog to digital conversion
- Data-routing applications
- War field flying robot with a night vision flying camera
- D/A converters
- Make half adder
- Analog, digital or video signal switching
- Enabling block of memory depending on address in memory chips
- Idle motor
