SN74ALS153DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 15 ns |
| Quiescent Current | 7.5mA |
| Family | ALS |
| Number of Inputs | 8 |
| Current - Output High, Low | 2.6mA 24mA |
| Supply Type | Single |
| Bandwidth | 75MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS153DR Overview
Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.In this case, it is packaged as Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.The analog IC in the multiplexers is identified as Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to 0°C~70°C.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74ALS series.Among its basic configurations are 16 terminations.As its base part number is 74ALS153, logic switch can also be used to find its related parts.In multiplexer's system, 5V is the voltage supplied.In this turn signal switch, there are 16 components that can be connected to each pin.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.This multiplexer ic has 16 pins configured.The mounting is in the way of Surface Mount.The logic switch is a member of the ALS family.There are 4 bits in signal multiplexer.The power supply of 5V is provided for mux switch's normal operation.The turn signal switch contains 1 outputs designed to operate.Not being affected by the external factors, consumes 7.5mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The multiplexer is equipped with 8 inputs.The switches package is packaged in accordance with TR.This turn signal switch's circuit is based on a circuit with 2 channels.
SN74ALS153DR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74ALS153DR Applications
There are a lot of Texas Instruments SN74ALS153DR Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Decimal decoder
- War field flying robot with a night vision flying camera
- Make half adder
- Implementing boolean functions with multiple variables
- Medical industry
- Solenoid cooling fan
- LVDS
- VGA
- Logic gates for other digital devices
