SN74ALS157ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 9 ns |
| Quiescent Current | 6mA |
| Family | ALS |
| Number of Inputs | 8 |
| Current - Output High, Low | 400μA 8mA |
| Supply Type | Single |
| Bandwidth | 75MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS157ADR Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).Cut Tape (CT) is the method used for packaging.The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.By keeping the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Multiplexers of the 74ALS series can be used in a wide range of applications.It is designed with 16 terminations as part of its basic configuration.There is a base part number of 74ALS157 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 16 component pins.GULL WING represents the end of conductors.There is a type of supply of Single.There are 16 pins on it.It is mounted in the way of Surface Mount.The logic switch belongs to the family of ALS.As a result, signal multiplexer provides a total of 2 bits.In order to maintain mux switch's normal operation, power is provided to 5V.There are 1 outputs designed to operate the turn signal switch.Without external influences, it consumes 6mA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.This multiplexer provides 8 inputs.The switches package is packaged in accordance with the TR method.A total of 4 channels are used for transmission in the turn signal switch's circuit.
SN74ALS157ADR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74ALS157ADR Applications
There are a lot of Texas Instruments SN74ALS157ADR Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Transmission from the computer system of a satellite
- Electronic circuits
- Make full adder
- Paper plants
- Small scale TV wall
- Microprocessor instruction decoding
- Used to connect a single source to multiple destinations
- Medium scale TV wall
- Data demultiplexing
