banner_page

SN74ALS158D

16 Terminations4.5V~5.5V 16 Pin 74ALS158 Signal switch74ALS Series 1 Outputs4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALS158D
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 688
  • Description: 16 Terminations4.5V~5.5V 16 Pin 74ALS158 Signal switch74ALS Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Base Part Number 74ALS158
Pin Count 16
Number of Outputs 1
Operating Supply Voltage 5V
Circuit 4 x 2:1
Power Supplies 5V
Number of Channels 4
Load Capacitance 50pF
Number of Bits 2
Propagation Delay 9 ns
Family ALS
Number of Inputs 8
Current - Output High, Low 400μA 8mA
Supply Type Single
Bandwidth 75MHz
Output Polarity INVERTED
Voltage Supply Source Single Supply
Independent Circuits 1
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature 0°C~70°C
Packaging Tube
Series 74ALS
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Termination SMD/SMT
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Technology TTL
Voltage - Supply 4.5V~5.5V

SN74ALS158D Overview


In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).Tube represents its packaging.Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Multiplexer.In the case of 0°C~70°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74ALS series, these multiplexers have a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.The base part number is 74ALS158, so you can find its logic switch related parts using that number.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 16 can be found on this turn signal switch.It is the end of conductors that is represented by GULL WING.There is a type of supply of Single.This multiplexer ic is configured with 16 pins.Surface Mount is the way it is mounted.Among the family of ALS the logic switch is a member.There are 2 bits signal multiplexer provides.There is a power supply provided for the mux switch's normal operation of 5V.In order for the turn signal switch to work, there are 1 outputs.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.A multiplexer such as this has 8 inputs available.A total of 4 channels are used for transmission in the turn signal switch's circuit.

SN74ALS158D Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74ALS158D Applications


There are a lot of Texas Instruments SN74ALS158D Signal Switches / Multiplexers / Decoders applications.

  • Speed control of medern motors
  • Automation system
  • HDMI applications
  • Paper plants
  • RF-based home automation system
  • Metal detectors
  • Make half adder
  • Signal router
  • Logic circuits
  • Analog to digital conversion

Write a review

Note: HTML is not translated!
    Bad           Good