SN74ALS158NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS158 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 9 ns |
| Quiescent Current | 5mA |
| Family | ALS |
| Number of Inputs | 8 |
| Current - Output High, Low | 400μA 8mA |
| Supply Type | Single |
| Bandwidth | 75MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS158NSR Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.209, 5.30mm Width).The package is packaged in the manner of Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.Multiplexer is the analog IC that the multiplexers uses.In the case of 0°C~70°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Multiplexers in the 74ALS series are suitable for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is 74ALS158, which is also useful when looking up signal switch's related components.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Its supply type is Single, which is used as the source of power.The board is configured with 16 pins.The mounting is in the way of Surface Mount.I would like to refer to the logic switch as a member of the ALS family.As a result, signal multiplexer provides 2 bits.In order for 5V to operate normally, a power supply is provided.The turn signal switch operates with 1 outputs.No external influence consumes 5mA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.A multiplexer such as this has 8 inputs available.The switches package is packaged in accordance with TR.A total of 4 transmission channels are available in the turn signal switch's circuit.
SN74ALS158NSR Features
Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74ALS158NSR Applications
There are a lot of Texas Instruments SN74ALS158NSR Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- Steel plants
- Enabling block of memory depending on address in memory chips
- Make full adder
- Combinational circuit
- Solenoid cooling fan
- Idle motor
- Metal detectors
- Computer memory
- HD surveillance system
