SN74ALS174N
| Parameters | |
|---|---|
| Clock Frequency | 50MHz |
| Propagation Delay | 17 ns |
| Turn On Delay Time | 3 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 400μA 8mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 17ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -400μA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 50MHz |
| Base Part Number | 74ALS174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 8mA |
| Number of Bits | 6 |
SN74ALS174N Overview
In the form of 16-DIP (0.300, 7.62mm), it has been packaged. As part of the package Tube, it is embedded. This output is configured with Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Through Holeis occupied by this electronic component. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74ALS series. It should not exceed 50MHzin terms of its output frequency. A total of 1elements are present in it. As a result, it consumes 19mA quiescent current. The 74ALS174family includes it. It is mounted by the way of Through Hole. This board is designed with 16pins on it. The clock edge trigger type for this device is Positive Edge. There are 6bits in this flip flop. To achieve this superior flexibility, 7 circuits are used. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It offers maximum design flexibility with its output current of 8mA. There are 2 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It has 3lines. The high level output current is set to -400μA. In the low level output current setting, 8mAis used. It is recommended that the operating temperature be lower than 70°C. It is recommended that the operating temperature is higher than 0°C. It is powered by 4.5V as its minimum supply voltage. There is a maximum voltage support of 5.5V. It is possible to achieve 50MHz frequencies.
SN74ALS174N Features
Tube package
74ALS series
16 pins
6 Bits
SN74ALS174N Applications
There are a lot of Texas Instruments SN74ALS174N Flip Flops applications.
- Automotive
- Clock pulse
- Balanced Propagation Delays
- Single Down Count-Control Line
- QML qualified product
- Bounce elimination switch
- Supports Live Insertion
- Synchronous counter
- Counters
- 2 – Bit synchronous counter
