SN74ALS175D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 17 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 14mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 17ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| fmax-Min | 50 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS175D Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. The package Tubecontains it. The output it is configured with uses Differential. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at 0°C~70°C TA. D-Typeis the type of this D latch. It is a type of FPGA belonging to the 74ALS series. Its output frequency should not exceed 50MHz Hz. There are 1 elements in it. As a result, it consumes 14mA quiescent current. Currently, there are 16 terminations. It is a member of the 74ALS175 family. Power is supplied from a voltage of 5V volts. ALSis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. 16pins are included in its design. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. The superior flexibility of this circuit is achieved by using 7 circuits. The power supply is 5V. High efficiency requires the supply voltage to be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 8mA. It operates with 2 output lines. As of now, there are 3input lines.
SN74ALS175D Features
Tube package
74ALS series
16 pins
5V power supplies
SN74ALS175D Applications
There are a lot of Texas Instruments SN74ALS175D Flip Flops applications.
- 2 – Bit synchronous counter
- Computing
- Count Modes
- Latch
- Automotive
- Frequency division
- Patented noise
- Single Up Count-Control Line
- Reduced system switching noise
- Frequency Divider circuits
