SN74ALS175DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 14mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 17ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Number of Output Lines | 2 |
| fmax-Min | 50 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS175DR Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. Package Cut Tape (CT)embeds it. T flip flop uses Differentialas the output. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is operating at 0°C~70°C TA. This D latch has the type D-Type. It is a type of FPGA belonging to the 74ALS series. A frequency of 50MHzshould not be exceeded by its output. The list contains 1 elements. It consumes 14mA of quiescent current without being affected by external factors. The number of terminations is 16. The object belongs to the 74ALS175 family. A voltage of 5V is used as the power supply for this D latch. This D flip flop belongs to the family of ALS. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device has the base part number FF/Latches. The superior flexibility of this product is achieved by using 7 circuits. Due to its reliability, this T flip flop is well suited for TR. The power supply is 5V. If high efficiency is desired, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 8mA . There are 2 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It is reported that there are 3 input lines.
SN74ALS175DR Features
Cut Tape (CT) package
74ALS series
16 pins
5V power supplies
SN74ALS175DR Applications
There are a lot of Texas Instruments SN74ALS175DR Flip Flops applications.
- Patented noise
- Frequency Dividers
- Data Synchronizers
- Storage Registers
- Instrumentation
- Cold spare funcion
- Functionally equivalent to the MC10/100EL29
- Automotive
- Shift Registers
- Storage registers
