SN74ALS191ADG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | 74ALS191 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 37 ns |
| Family | ALS |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 22mA |
| Clock Edge Trigger Type | Positive Edge |
| Load/Preset Input | YES |
| Timing | Synchronous |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS191ADG4 Overview
This device is packaged in a 16-SOIC (0.154, 3.90mm Width) package. In order to configure it, it uses 16terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. In wires, 1elements are connected. A total of 16pins are present on all components. Tubeis the packaging method used for this package. As part of the circuit, there are 16pins that connect other components. Surface Mountis the way in which it is mounted. It is included in the ALSfamily. As a member of the 74ALSseries, it is ideal for a wide range of applications. Binary Counteris used as the logic type. 0°C~70°Cshould be the operating temperature. A mounting type of Surface Mountis adopted. Providing a voltage of 4.5V~5.5Vensures higher reliability of operation. The array contains elements that store 4bits each. It is possible for the result to be yesin Pbfree code. An important feature of this electronic device is [0]. Further related parts can be found under its base part number 74ALS191. As a result of the voltage source, there is 5V voltage. To operate, it requires a supply voltage of 5V volts. Frequency 30MHzdetermines its operation.
SN74ALS191ADG4 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 30MHz
SN74ALS191ADG4 Applications
There are a lot of Texas Instruments SN74ALS191ADG4 Counters & Dividers applications.
- MULTIPLICATION
- Frequency dividing circuits
- Up Counters
- SQUARE ROOT
- DIVISION
- TRUE RMS-TO-DC CONVERSION
- LINEARIZATION
- Programmable binary and decade
- Counter control/timers
- ANALOG SIGNAL PROCESSING
