SN74ALS191ANE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| JESD-609 Code | e4 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TCO OUTPUT |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 37 ns |
| Turn On Delay Time | 37 ns |
| Family | ALS |
| Logic Function | Counter |
| Direction | Bidirectional |
| Max I(ol) | 0.008 A |
| Sync/Async | Synchronous |
| Power Supply Current-Max (ICC) | 22mA |
| Clock Edge Trigger Type | Positive Edge |
| Load/Preset Input | YES |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ALS191ANE4 Overview
This device is supplied in the PDIP package. Using 16terminations, it can be configured. 5Vis fully flexible due to its voltage supply. The 1elements are connected by wires. A total of 16pins are available on all components. As part of the circuit, there are 16pins used to connect other components. It is mounted in the way of [0]. Initially, it appears to belong to the ALS family. There is information in the device in the form of 4bits. A major feature of this electronic device is its [0]. A temperature grade of COMMERCIALis specified for this device. It is packed by [0]. In this case, there is 5V voltage coming from the voltage source. It takes supply voltage of 5V to operate. It operates at the maximum temperature of 70°C for extended periods of time with acceptable stability of its electrical characteristics. This device is designed to operate within a specific temperature range, with the lower limit generally set at 0°C. In this case, the frequency is 30MHz Hz. The maximum voltage that can be applied to the device is 5.5V. In the case of this device, the minimum voltage is as low as 4.5V volts.
SN74ALS191ANE4 Features
Embedded in the PDIP package
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 30MHz
SN74ALS191ANE4 Applications
There are a lot of Texas Instruments SN74ALS191ANE4 Counters & Dividers applications.
- MULTIPLICATION
- VHF, UHF, FM, AM, etc.
- Control counters
- Fixed or Programmable Frequency Division
- Divide-by-N counting
- Time-delay circuits
- Communications Digital Frequency Synthesizers;
- Timing applications
- Timers
- Time Out Timer for Consumer-Application Industrial Controls
