SN74ALS193AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | 74ALS193 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 30 ns |
| Reset | Asynchronous |
| Family | ALS |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 22mA |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS193AN Overview
This device is supplied in the 16-DIP (0.300, 7.62mm) package. This configuration uses 16terminations. The supply voltage of 5V permits it to operate with full flexibility. An interconnection of 1elements is provided by wires. A total of 16pins are present on all components. It is packaged in the way of Tube. To connect the circuit's other components, there are 16pins. Through Holeis the way in which it is mounted. In this case, it appears as a member of the family [0]. Having been designed as a member of the 74ALSseries, it is well suited for use in a wide range of applications. Binary Counteris used as the logic type. Setting the operating temperature to 0°C~70°C is recommended. Having a mounting type of [0], it is suitable for installation. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array contains elements containing 4bits each. When it comes to this electronic device, TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK are much important features. The base part number of 74ALS193provides access to more related parts. Voltage from the voltage source is [0]. To operate, it requires a supply voltage of [0]. Frequency 30MHzdetermines its operation.
SN74ALS193AN Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
Operating supply voltage of 5V
Frequency of 30MHz
SN74ALS193AN Applications
There are a lot of Texas Instruments SN74ALS193AN Counters & Dividers applications.
- Counter control/timers
- VHF, UHF, FM, AM, etc.
- Communications Digital Frequency Synthesizers;
- Frequency dividers
- Fixed or Programmable Frequency Division
- MULTIPLICATION
- SQUARE ROOT
- Analog multiplexing and demultiplexing
- Dual Up Counters
- Fixed and programmable counters greater than 10
