SN74ALS232BDWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 74ALS232 |
| JESD-30 Code | R-PDSO-G16 |
| Function | Asynchronous |
| Current - Supply (Max) | 125mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 64 16 x 4 |
| Clock Frequency | 40MHz |
| Access Time | 30ns |
| Data Rate | 40MHz |
| Organization | 16X4 |
| Output Characteristics | 3-STATE |
| Memory Width | 4 |
| Memory Density | 64 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | No |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 25 ns |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS232BDWR Overview
16-SOIC (0.295, 7.50mm Width) is a package that contains FIFO memory chip.This FIFO memory chip is packaged as a Tape & Reel (TR) .A FIFO chip's memory is 64 16 x 4 , which may be used to store applications and data.The temperature should be adjusted to 0°C~70°C in order to ensure reliable operation.Surface Mount is the mounting type of the FIFO memory.Powered by a voltage of 4.5V~5.5V , it operates on a low supply voltage.It is a member of the 74ALS series .125mA is memory IC's maximum operating supply current.Surface Mount is recommended as the mounting method.Memory IC belongs to the 74ALS232 family.A supply voltage of 5V allows for high efficiency.As a result of this, FIFO means contains 16 terminations.The gadget is self-contained and can be found in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Normaly, the component is powered by 5V power supplies.It is set to 5.5V volts for the FIFO memory IC's maximum supply voltage.Keeping the supply voltage (Vsup) above 4.5V is essential for normal operation.This FIFO memory IC has a clock frequency of 40MHz .
SN74ALS232BDWR Features
64 16 x 4 memory size
74ALS series
Best part number of 74ALS232
FIFOs category
Clock frequency of 40MHz
SN74ALS232BDWR Applications
There are a lot of Texas Instruments SN74ALS232BDWR FIFOs Memory applications.
- Extended product-change notification
- Video time base correction
- Microprogramming
- Down-Hole Energy Drilling
- Programmable Logic Controller
- Battery Charger
- IP Radio
- Network switching/routing
- Video
- Computers
