SN74ALS253DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS253 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 14 ns |
| Family | ALS |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Supply Type | Single |
| Bandwidth | 75MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS253DRG4 Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is in the form of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.A digital IC Multiplexer is used as the analog component of the multiplexers.A temperature of 0°C~70°C will not leave the turn signal swturn signal switchch susceptible to external influences.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.With the 74ALS series, the multiplexers are suitable for a diverse range of applications.The basic configuration of this system includes 16 terminations.Its logic switch base part number is 74ALS253 which can also be used to find its logic switch related parts.In multiplexer's system, 5V is the voltage supplied.There are 16 component pins in this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply Single that is employed in this case.Currently, it is configured with 16 pins.The mounting is in the way of Surface Mount.The logic switch is a member of the ALS family.Signal multiplexer consists of 4 bits.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.As a result, the turn signal switch consists of 1 outputs.A TR packaging method is used in the switches.This turn signal switch's circuit uses 2 transmission channels.
SN74ALS253DRG4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
SN74ALS253DRG4 Applications
There are a lot of Texas Instruments SN74ALS253DRG4 Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- Video transmission
- Speed control of medern motors
- Data collection system
- LVDS
- High-performance memory systems
- Encrypted communications system
- Microprocessor input/output systems
- Night vision cameras
- Transmission from the computer system of a satellite
