banner_page

SN74ALS258AN

16 Terminations4.5V~5.5V 16 Pin 74ALS258 Signal switch74ALS Series 1 Outputs4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALS258AN
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 495
  • Description: 16 Terminations4.5V~5.5V 16 Pin 74ALS258 Signal switch74ALS Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Weight 951.693491mg
Operating Temperature 0°C~70°C
Packaging Tube
Series 74ALS
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Number of Functions 4
Supply Voltage 5V
Base Part Number 74ALS258
Pin Count 16
Number of Outputs 1
Operating Supply Voltage 5V
Circuit 4 x 2:1
Power Supplies 5V
Number of Channels 4
Load Capacitance 50pF
Power Dissipation 1.1W
Number of Bits 2
Propagation Delay 8 ns
Family ALS
Number of Inputs 8
Output Characteristics 3-STATE
Current - Output High, Low 2.6mA 24mA
Supply Type Single
Bandwidth 75MHz
Output Polarity INVERTED
Voltage Supply Source Single Supply
Independent Circuits 1
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ALS258AN Overview


In order to save board space, digital switch is located in the 16-DIP (0.300, 7.62mm).Tube is the method used for packaging.Digital switch ic uses a Through Hole mounting method.Multiplexer is the analog IC that the multiplexers uses.If the operating temperature is maintained at 0°C~70°C, turn signal switch will not be susceptible to external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.As a member of 74ALS series, the multiplexers can be used for a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.Its logic switch base part number is 74ALS258 which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch consists of 16 component pins.The supply type of this multiplexer ic is Single.Currently, it is configured with a 16 pin configuration.The mount is in Through Hole.The logic switch is a member of the ALS family.There are 2 bits signal multiplexer provides.There is a power supply provided for the mux switch's normal operation of 5V.In order for the turn signal switch to work, there are 1 outputs.The performance of the multiplexers can be reliably maintained at a voltage of 5V.This multiplexer has a total of 8 inputs.This turn signal switch's circuit is based on a circuit with 4 channels.

SN74ALS258AN Features


Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74ALS258AN Applications


There are a lot of Texas Instruments SN74ALS258AN Signal Switches / Multiplexers / Decoders applications.

  • Data-routing applications
  • Logic gates for other digital devices
  • A robotic vehicle with the metal detector
  • Analog to digital conversion
  • Memory system of computers
  • A/D converters
  • Injectors
  • Audio transmission
  • Metal detectors
  • Enabling block of memory depending on address in memory chips

Write a review

Note: HTML is not translated!
    Bad           Good