SN74ALS259DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS259 |
| Pin Count | 16 |
| Output Type | Standard |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Nominal Supply Current | 22mA |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 22 ns |
| Quiescent Current | 14mA |
| Turn On Delay Time | 2 ns |
| Family | ALS |
| Logic Function | D-Type, Shift Register |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Schmitt Trigger | No |
| Number of Input Lines | 3 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS259DR Overview
It is embedded in the 16-SOIC (0.154, 3.90mm Width) package. A Cut Tape (CT) package is used to package it. It is configured with an output of Standard. A D-Type, Addressable logic type is used in this electrical device. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C is used for operation. 74ALS is the series number of this FPGA. The design of this electronic part is based on 8 bits. This device has been designed with 16 terminations available. As a member of the 74ALS259 family, it falls under that category. A 5V voltage supply is required for operation. It is equipped with 16 pin count. It is part of the family of electronic devices called ALS. Designed with 16 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. Subcategory FF/Latch contains this part. The device is powered by 5V power supplies. There are 3 input lines in which electronic circuits are present. This device is well suited for TR based on its reliable performance. As the output current is 8mA, the design flexibility is maximum. For maximum efficiency, the supply voltage should be set to 5V. Aquiescent current is consumed by 14mA without being affected by external forces. It consists of 1 elements.
SN74ALS259DR Features
16-SOIC (0.154, 3.90mm Width) package
74ALS series
8 Bits
74ALS259 family
16 pin count
16 pins
5V power supplies
1 elements
SN74ALS259DR Applications
There are a lot of Texas Instruments SN74ALS259DR Latches applications.
- Flip-flops
- Buffer/Storage Registers
- Parallel data storage
- Hammer
- Parallel-to-Serial Data Conversion
- Communication systems
- Address register
- Buffer Storage
- Shift left register
- Data acquisition
