SN74ALS273N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 35MHz |
| Base Part Number | 74ALS273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 100μA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 2 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20mA |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 8 |
| Max Frequency | 35MHz |
| Max Propagation Delay @ V, Max CL | 15ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -2.6mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS273N Overview
The package is in the form of 20-DIP (0.300, 7.62mm). A package named Tubeincludes it. The output it is configured with uses Non-Inverted. This trigger uses the value Positive Edge. Through Holeis occupied by this electronic component. A supply voltage of 4.5V~5.5V is required for operation. The operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74ALS series. Its output frequency should not exceed 35MHz Hz. The element count is 1 . There is a consumption of 20mAof quiescent energy. The 74ALS273family includes it. A part of the electronic system is mounted in the way of Through Hole. The electronic flip flop is designed with pins 20. There is a clock edge trigger type of Positive Edgeon this device. The design is based on 8bits. The superior flexibility is achieved through the use of 8 circuits. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. As a result of its output current of 24mA, it is very flexible in terms of design. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Currently, there are 3 input lines present. It is set to -2.6mAfor the high level output current. In the low level output current setting, 24mAis used. A temperature below 70°Cshould be used for operation. In order for the system to operate properly, the temperature should be higher than 0°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. It supports a maximum supply voltage of 5.5V volts. We are able to achieve a frequency of 35MHz.
SN74ALS273N Features
Tube package
74ALS series
20 pins
8 Bits
SN74ALS273N Applications
There are a lot of Texas Instruments SN74ALS273N Flip Flops applications.
- ESCC
- Count Modes
- Registers
- Data Synchronizers
- Safety Clamp
- Patented noise
- Computing
- ESD protection
- Individual Asynchronous Resets
- Computers
