SN74ALS29821NT
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | Through Hole |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Base Part Number | 74ALS29821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Output Current | 48mA |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 2 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 115mA |
| Current - Output High, Low | 24mA 48mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 300pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS29821NT Overview
As a result, it is packaged as 24-DIP (0.300, 7.62mm). You can find it in the Tubepackage. The output it is configured with uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.75V~5.25V volts. A temperature of 0°C~70°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74ALS series. D latch consists of 1 elements. As a result, it consumes 115mA quiescent current and is not affected by external forces. There are 24 terminations,The 74ALS29821 family contains it. A voltage of 5V is used to power it. Devices in the ALSfamily are electronic devices. It is mounted by the way of Through Hole. With its 24pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. The part you are looking for is included in FF/Latches. The D flip flop is embedded with 2ports. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. With an output current of 48mA, this device offers maximum design flexibility. Currently, there are 3 lines of input. In addition, you can refer to the additinal POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION of the D latch. It is possible to achieve a frequency of 10MHz.
SN74ALS29821NT Features
Tube package
74ALS series
24 pins
SN74ALS29821NT Applications
There are a lot of Texas Instruments SN74ALS29821NT Flip Flops applications.
- EMI reduction circuitry
- Load Control
- Control circuits
- Buffered Clock
- Frequency Dividers
- Differential Individual
- Power down protection
- Buffer registers
- Test & Measurement
- Computing
