SN74ALS29863DWE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH DUAL INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| Subcategory | Bus Driver/Transceivers |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS29863 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 9 |
| Load Capacitance | 300pF |
| Number of Ports | 2 |
| Number of Bits | 9 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 23 ns |
| Family | ALS |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Current - Output High, Low | 24mA 48mA |
| Logic Type | Transceiver, Non-Inverting |
| Max I(ol) | 0.048 A |
| Control Type | INDEPENDENT CONTROL |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 65mA |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS29863DWE4 Overview
Logical driver uses a neat 24-SOIC (0.295, 7.50mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.75V~5.25V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is 24mA 48mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74ALS series devices. 24 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Electronic parts from the ALS family are used in this part. 24 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 24 pins. Enhanced with 2 ports. You can search "74ALS29863" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under INDEPENDENT CONTROL control technology. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 9 bits are included within the electrical component. Logical driver features WITH DUAL INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION to better serve the need. 9 channels for high quality communication.
SN74ALS29863DWE4 Features
Bus Driver/Transceivers
WITH DUAL INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
SN74ALS29863DWE4 Applications
There are a lot of Texas Instruments SN74ALS29863DWE4 Buffers & Transceivers applications.
- Interconnection between switches and computers
- SONET/SDH Network
- Cell phones
- Satellite ground stations
- Changeing the frequency from IF to RF
- Wireless network systems
- interconnection between switches
- Data center
- Wireless HD Photography
- Televisions
