banner_page

SN74ALS373ADBR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS373 20 Pins DUAL TTL 20-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALS373ADBR
  • Package: 20-SSOP (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 439
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS373 20 Pins DUAL TTL 20-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Weight 156.687814mg
Operating Temperature 0°C~70°C
Packaging Cut Tape (CT)
Series 74ALS
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74ALS373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 25mA
Output Current 24mA
Number of Bits 8
Propagation Delay 23 ns
Quiescent Current 17mA
Turn On Delay Time 6 ns
Family ALS
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 2.6mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 27mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2mm
Length 7.2mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week

SN74ALS373ADBR Overview


The package in which it is embedded is named 20-SSOP (0.209, 5.30mm Width). This package has the format of Cut Tape (CT). In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. The operating temperature is 0°C~70°C. An FPGA of this type belongs to the 74ALS series. An electronic part with 8 bits is designed. This device has been designed with 20 terminations available. The family 74ALS373 includes it. A 5V voltage supply is required for operation. The 20 pind are equipped with it. It is a member of the ALS family of electronic devices. There are 20 pins on it. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports. This part can be found within the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. Electronic circuits comprise 8 input lines. This device is well suited for TR based on its reliable performance. With 24mA, maximum design flexibility is ensured. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are no external factors that affect it, so it consumes 17mA quiescent current. Maximum power supply (ICC) for its operation is 27mA.

SN74ALS373ADBR Features


20-SSOP (0.209, 5.30mm Width) package
74ALS series
8 Bits
74ALS373 family
20 pin count
20 pins
5V power supplies

SN74ALS373ADBR Applications


There are a lot of Texas Instruments SN74ALS373ADBR Latches applications.

  • Parallel data storage
  • Counting
  • Pseudo-random code generators
  • Relay
  • Shift Registers
  • Flip-flops
  • Registers
  • Shift right register
  • Synchronous frequency dividers
  • Lamp and Display (LED)

Write a review

Note: HTML is not translated!
    Bad           Good