banner_page

SN74ALS373ADWG4

D-Type, Latch 8 Bits Latches 20 Pins DUAL TTL SOIC


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALS373ADWG4
  • Package: SOIC
  • Datasheet: -
  • Stock: 877
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL TTL SOIC(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case SOIC
Number of Pins 20
Weight 500.709277mg
Packaging Rail/Tube
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Subcategory FF/Latches
Technology TTL
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Pin Count 20
Operating Supply Voltage 5V
Number of Elements 1
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of Ports 2
Nominal Supply Current 25mA
Current - Output 24mA
Number of Bits 8
Propagation Delay 16 ns
Turn On Delay Time 6 ns
Family ALS
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.024 A
High Level Output Current -2.6mA
Low Level Output Current 32mA
Power Supply Current-Max (ICC) 27mA
Number of Input Lines 8
Height 2.35mm
Length 12.8mm
Width 7.52mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74ALS373ADWG4 Overview


In the SOIC package, it is embedded. The package is in the form of Rail/Tube. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations that have been designed. The device is operated when the supply voltage is set to 5V. With 20 pins, it is equipped. It is a member of the ALS family of electronic devices. The device has 20 pins. The electronic part is mounted using the Surface Mount method. This device is equipped with 2 ports. Subcategory FF/Latches includes this part. There is 5V power supply for it. There are 8 input lines in which electronic circuits are present. High efficiency requires a voltage supply of 5V. The element count is 1. In order to operate properly, its maximum power current (ICC) should be 27mA. 32mA is the low level output current. -2.6mA is set as the high level output current. Lower than 70°C is the recommended operating temperature. A temperature greater than 0°C should be used for operation. 5.5V is the maximum voltage it supports. With a voltage of 4.5V, it operates at its minimum capacity. It uses a logic IC of type BUS DRIVER. The output current of this device is 24mA, which makes it a very flexible design element.

SN74ALS373ADWG4 Features


SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
1 elements

SN74ALS373ADWG4 Applications


There are a lot of Texas Instruments SN74ALS373ADWG4 Latches applications.

  • Motor Drives
  • Automotive HEV/EV Powertrain
  • Decade counting
  • Network Switches
  • Shift right with parallel loading
  • Multi-line decoders
  • A/D and D/A conversion
  • Meter applications
  • Counter control
  • Buffer register

Write a review

Note: HTML is not translated!
    Bad           Good