SN74ALS373ADWR
| Parameters | |
|---|---|
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 25mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 23 ns |
| Quiescent Current | 17mA |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
SN74ALS373ADWR Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. A package of Cut Tape (CT) has been used. It uses Tri-State as the output. D-Type Transparent Latch is the logic type of this electrical device. The electronic component is mounted according to the Surface Mount method. There is no supply voltage for this device. The temperature at which the machine is operating is 0°C~70°C. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. This device is designed with 20 terminations. The family 74ALS373 includes it. It operates with a supply voltage of 5V. It has 20 pins that makes it easy to use. ALS is the family of this electronic device. The device has 20 pins. Electronic parts are mounted using the Surface Mount method. This device has 2 ports that can be connected to it. FF/Latches is the subcategory of this part. 5V power supplies are needed to operate it. Input Lines consist of electronic circuits, and there are 3. This device is well suited for TR based on its reliable performance. With an output current of 24mA, it is highly flexible in terms of design. Optimal efficiency requires 5V as the supply voltage. Without external influences, it consumes 17mA quiescent current.
SN74ALS373ADWR Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS373 family
20 pin count
20 pins
5V power supplies
SN74ALS373ADWR Applications
There are a lot of Texas Instruments SN74ALS373ADWR Latches applications.
- Shift left register
- Digital bus buffer
- Shift right register
- Automotive Infotainment
- Accumulator Registers
- Pattern generators
- Decade counting
- Communication systems
- Shift left with parallel loading
- Four-bit storage with output enable
