SN74ALS373ADWRG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 25mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 27mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
SN74ALS373ADWRG4 Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. As a result, it has a packaging of Tape & Reel (TR). It uses Tri-State as the output. The Logic type of this electrical device is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. A temperature of 0°C~70°C is used for operation. 74ALS is the series number of this FPGA. The design of this electronic part contains 8 bits. In this device, there are 20 terminations that have been designed. As a member of the 74ALS373 family, it falls under that category. The device works with a voltage of 5V for its supply voltage. With 20 pins, it is equipped. ALS is the family of this electronic device. 20 pins are used in its design. The electronic part is mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. The part belongs to the FF/Latches subcategory. There are 5V power supplies attached to it. Input Lines consist of electronic circuits, and there are 8. Its reliable performance makes it an excellent choice for TR. The output current of 24mA makes it feature maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. In order to operate properly, its maximum power current (ICC) should be 27mA.
SN74ALS373ADWRG4 Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS373 family
20 pin count
20 pins
5V power supplies
SN74ALS373ADWRG4 Applications
There are a lot of Texas Instruments SN74ALS373ADWRG4 Latches applications.
- Counting
- Display driver
- Lamp and Display (LED)
- Pattern generators
- Serial Output Data Queuing
- Watches
- Display
- Shift register
- Flip-flops
- A/D and D/A conversion
