banner_page

SN74ALS373ANSRG4

D-Type, Latch 8 Bits Latches 20 Pins DUAL TTL SOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALS373ANSRG4
  • Package: SOP
  • Datasheet: PDF
  • Stock: 811
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL TTL SOP(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case SOP
Number of Pins 20
Weight 266.712314mg
Packaging Tape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Subcategory FF/Latches
Technology TTL
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Pin Count 20
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade COMMERCIAL
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of Ports 2
Nominal Supply Current 25mA
Current - Output 24mA
Number of Bits 8
Propagation Delay 16 ns
Turn On Delay Time 6 ns
Family ALS
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.024 A
High Level Output Current -2.6mA
Low Level Output Current 32mA
Power Supply Current-Max (ICC) 27mA
Independent Circuits 1
Height Seated (Max) 2mm
Width 5.3mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74ALS373ANSRG4 Overview


The package in which it is embedded is named SOP. Tape and Reel is the way in which it is packaged. This electronic part is designed with 8 Bits. This device has been designed with 20 terminations available. With a supply voltage of 5V, it operates. 20 pins are included. In terms of electronic devices, this one is in the ALS family. The 20 pins are designed into it. Mounting this electronic component follows the Surface Mount method. This device has 2 ports. This part can be found within the FF/Latches subcategory. A total of 5V power supplies are required for it to operate. The supply voltage should be maintained at 5V for high efficiency. The superior flexibility of this circuit can be attributed to the use of 8 circuits. As its maximal power current (ICC) reaches 27mA, it is able to operate. The low level output current is set to 32mA. -2.6mA represents the high level output current. Operating temperatures should be below 70°C. The operating temperature should be higher than 0°C. The maximum supply voltage is 5.5V. A voltage of 4.5V is the minimum supply voltage required for it to operate. As far as the logic IC is concerned, it uses BUS DRIVER. With an output current of 24mA, it is highly flexible in terms of design.

SN74ALS373ANSRG4 Features


SOP package
8 Bits
20 pin count
20 pins
5V power supplies

SN74ALS373ANSRG4 Applications


There are a lot of Texas Instruments SN74ALS373ANSRG4 Latches applications.

  • Avionics
  • Address register
  • Frequency
  • Parallel data synchronization
  • Automotive HEV/EV Powertrain
  • Serial Output Register
  • Control circuits
  • Synchronous frequency dividers
  • Serial Input
  • Automotive ADAS

Write a review

Note: HTML is not translated!
    Bad           Good