SN74ALS374ADW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS374ADW Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at a temperature of 0°C~70°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74ALSseries FPGA. You should not exceed 35MHzin its output frequency. In total, it contains 1 elements. Despite external influences, it consumes 19mAof quiescent current. It has been determined that there have been 20 terminations. If you search by 74ALS374, you will find similar parts. The power source is powered by 5V. A device of this type belongs to the family of ALS. A part of the electronic system is mounted in the way of Surface Mount. The 20pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 8. The superior flexibility of this circuit is achieved by using 8 circuits. The system runs on a power supply of 5V watts. The flip flop contains 2ports. High efficiency requires the supply voltage to be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 24mA. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74ALS374ADW Features
Tube package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS374ADW Applications
There are a lot of Texas Instruments SN74ALS374ADW Flip Flops applications.
- Matched Rise and Fall
- Frequency Dividers
- Functionally equivalent to the MC10/100EL29
- Clock pulse
- Supports Live Insertion
- Dynamic threshold performance
- Guaranteed simultaneous switching noise level
- Circuit Design
- Set-reset capability
- High Performance Logic for test systems
