SN74ALS374AN
| Parameters | |
|---|---|
| Clock Frequency | 35MHz |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ALS374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
SN74ALS374AN Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. Tri-State, Non-Invertedis the output configured for it. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. 0°C~70°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74ALSseries contain this type of chip. A frequency of 35MHzshould be the maximum output frequency. There are 1 elements in it. Despite external influences, it consumes 19mAof quiescent current. Terminations are 20. If you search by 74ALS374, you will find similar parts. Power is supplied from a voltage of 5V volts. ALSis the family of this D flip flop. There is an electronic part that is mounted in the way of Through Hole. 20pins are included in its design. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. The flip flop is designed with 8bits. Using 8 circuits, it is highly flexible. An electrical current of 5V volts is applied to it. A total of 2ports are embedded in the D flip flop. High efficiency requires the supply voltage to be maintained at 5V. It offers maximum design flexibility with its output current of 24mA. It is reported that there are 3 input lines.
SN74ALS374AN Features
Tube package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS374AN Applications
There are a lot of Texas Instruments SN74ALS374AN Flip Flops applications.
- Latch
- Storage registers
- Balanced 24 mA output drivers
- Functionally equivalent to the MC10/100EL29
- Instrumentation
- Shift registers
- Registers
- Modulo – n – counter
- Differential Individual
- Storage Registers
