SN74ALS533AN
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | 74ALS533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 26mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
SN74ALS533AN Overview
A package called 20-DIP (0.300, 7.62mm) contains it. A package of Tube has been used. It uses Tri-State as the output. D-Type Transparent Latch is the logic type of this electrical device. Mounting this electronic component follows the Through Hole method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. It is 0°C~70°C at the operating temperature. In the 74ALS series, this FPGA is located. With this electronic part, there are 8 bits. A device with this design has 20 terminations. 74ALS533 is the family name of it. The supply voltage of the device is 5V. 20 pins are included. It is a member of the ALS family of electronic devices. There are 20 pins on it. Through Hole is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches contains this part. There are 5V power supplies attached to it. Electronic circuits are represented by 8 input lines. As the output current is 24mA, the design flexibility is maximum. A high level of efficiency is achieved by maintaining the supply voltage at 5V.
SN74ALS533AN Features
20-DIP (0.300, 7.62mm) package
74ALS series
8 Bits
74ALS533 family
20 pin count
20 pins
5V power supplies
SN74ALS533AN Applications
There are a lot of Texas Instruments SN74ALS533AN Latches applications.
- Serial Input
- Serial Output Data Queuing
- Automotive ADAS
- Automotive Infotainment
- TV Set-top Boxes
- Automatic test equipment
- PCs and Notebooks
- Clocks
- Multistage ripple counting
- Bus system register with enable parallel lines at bus side
