SN74ALS534ADW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS534 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ALS534ADW Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. It is included in the package Tube. T flip flop uses Tri-State, Invertedas its output configuration. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. Currently, the operating temperature is 0°C~70°C TA. D-Typeis the type of this D latch. This type of FPGA is a part of the 74ALS series. In order for it to function properly, its output frequency should not exceed 35MHz. A total of 1elements are contained within it. It consumes 19mA of quiescent current without being affected by external factors. Terminations are 20. D latch belongs to the 74ALS534 family. Power is supplied from a voltage of 5V volts. This D flip flop belongs to the family of ALS. The electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. There is a Bus Driver/Transceiverbase part number assigned to the RS flip flops. This flip flop is designed with 8 Bits. Its flexibility is enhanced by 8 circuits. There are 5V power supplies attached to it. A D flip flop with 2embedded ports is available. In order to achieve high efficiency, the supply voltage should be maintained at 5V. It offers maximum design flexibility with its output current of 24mA. Currently, there are 3 lines of input.
SN74ALS534ADW Features
Tube package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS534ADW Applications
There are a lot of Texas Instruments SN74ALS534ADW Flip Flops applications.
- Patented noise
- Data storage
- Memory
- Circuit Design
- Power down protection
- Memory
- High Performance Logic for test systems
- Clock pulse
- Reduced system switching noise
- Control circuits
