SN74ALS534AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS534 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS534AN Overview
In the form of 20-DIP (0.300, 7.62mm), it has been packaged. As part of the package Tube, it is embedded. There is a Tri-State, Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. A temperature of 0°C~70°C TAis considered to be the operating temperature. D-Typeis the type of this D latch. FPGAs belonging to the 74ALSseries contain this type of chip. You should not exceed 35MHzin the output frequency of the device. In total, there are 1 elements. During its operation, it consumes 19mA quiescent energy. There are 20 terminations,You can search similar parts based on 74ALS534. A voltage of 5V is used to power it. Devices in the ALSfamily are electronic devices. In this case, the electronic component is mounted in the way of Through Hole. The electronic flip flop is designed with pins 20. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. Flip flops designed with 8bits are used in this part. Using 8 circuits, it is highly flexible. An electrical current of 5V volts is applied to it. The flip flop has 2embedded ports. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. With a current output of 24mA , it offers maximum design flexibility. 3input lines are available for you to choose from.
SN74ALS534AN Features
Tube package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS534AN Applications
There are a lot of Texas Instruments SN74ALS534AN Flip Flops applications.
- Divide a clock signal by 2 or 4
- ESCC
- Load Control
- High Performance Logic for test systems
- Balanced 24 mA output drivers
- CMOS Process
- Dynamic threshold performance
- Parallel data storage
- Single Down Count-Control Line
- Automotive
