SN74ALS563BDWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | BROADSIDE VERSION OF 533 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS563 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 26mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS563BDWR Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. Tape & Reel (TR) is the way in which it is packaged. In this configuration, the output is set to Tri-State. This electrical device has Logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. It operates at a voltage of 4.5V~5.5V. There is 0°C~70°C operating temperature. The 74ALS series is associated with this FPGA. It is designed with 8 bits. This device has been designed with 20 terminations available. As a member of the 74ALS563 family, it falls under that category. The device is operated when the supply voltage is set to 5V. It is equipped with 20 pin count. ALS is the family name of this electronic device. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. 2 ports are available on this device. In the subcategory FF/Latches, this part belongs. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. A total of 5V power supplies are needed to run it. There should be a voltage supply (Vsup) greater than 4.5V. It consists of 8 input lines from which an electronic circuit can be built. As a result of its reliable performance, it is well suited for TAPE AND REEL. The 24mA output current gives it maximum design flexibility. In addition to that, it is also characterized by BROADSIDE VERSION OF 533.
SN74ALS563BDWR Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS563 family
20 pin count
20 pins
5V power supplies
SN74ALS563BDWR Applications
There are a lot of Texas Instruments SN74ALS563BDWR Latches applications.
- Pattern generators
- Timers
- Counting
- Phase comparator
- Pattern Generators
- Display
- Shift left register
- General-Purpose Register
- Buffer Storage
- Counter timers
