SN74ALS563BNSRG4
| Parameters | |
|---|---|
| Nominal Supply Current | 26mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Power Supply Current-Max (ICC) | 29mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS563 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
SN74ALS563BNSRG4 Overview
It is embedded in the 20-SOIC (0.209, 5.30mm Width) package. Tape & Reel (TR) is the way in which it is packaged. Tri-State is used for the output it is configured with. This electrical device has a logic type of D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. With a supply voltage of 4.5V~5.5V, it operates. It operates at 0°C~70°C degrees Celsius. This FPGA is part of the 74ALS series. With this electronic part, there are 8 bits. A device such as this has 20 terminations designed. The family it belongs to is 74ALS563. The device works with a voltage of 5V for its supply voltage. 20 pins are provided. There is a device in this electronic family called ALS. It is designed with 20 pins. This electronic part is mounted in the way of Surface Mount. As far as ports are concerned, this device has 2 ports. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are needed to run it. An electronic circuit can be found on 8 input lines. As a result of its reliable performance, it is well suited for TR. With 24mA, maximum design flexibility is ensured. High efficiency requires a supply voltage of 5V. The maximal power current (ICC) supplied for its operation reaches 29mA.
SN74ALS563BNSRG4 Features
20-SOIC (0.209, 5.30mm Width) package
74ALS series
8 Bits
74ALS563 family
20 pin count
20 pins
5V power supplies
SN74ALS563BNSRG4 Applications
There are a lot of Texas Instruments SN74ALS563BNSRG4 Latches applications.
- Four-bit storage with output enable
- Shift right with parallel loading
- Watches
- Control circuits
- Relay
- BCD counting
- General-Purpose Register
- Counter control
- Serial Input
- Shift left with parallel loading
