SN74ALS569ADWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT; CLOCKED CARRY OUTPUT |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS569 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 28 ns |
| Reset | Asynchronous/Synchronous |
| Family | ALS |
| Logic Function | Counter |
| Direction | Up, Down |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 32mA |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS569ADWR Overview
The device is packaged in the 20-SOIC (0.295, 7.50mm Width)type. There are 20terminations used for configuring it. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. The device contains 1terminations. The number of all component pins is 20. It is packaged in the way of Tape & Reel (TR). In the circuit, there are 20pins that connect other parts. The Surface Mountway is used to mount it. Initially, it appears to belong to the ALS family. With its 74ALSseries designation, it can be used for a range of applications. It is assumed that the logic type is [0]. Ideally, the operating temperature should be set to 0°C~70°C. This device is mounted in a Surface Mountmanner. When the supply voltage is set to [0], it is able to operate with greater reliability. There are 4bits stored in each element of the array. Using the Pbfree code, the result may be yes. It is important to note that in regards to this electronic device, TCO OUTPUT; CLOCKED CARRY OUTPUTis an extremely significant feature. There are more related parts under the 74ALS569base part number. The packing of the product is carried out by [0]. From the voltage source, there is 5Vvoltage. It takes supply voltage of 5V to operate. A frequency of 30MHzis used for operation.
SN74ALS569ADWR Features
Embedded in the 20-SOIC (0.295, 7.50mm Width) package
4 bits per element
TCO OUTPUT; CLOCKED CARRY OUTPUT
Operating supply voltage of 5V
Frequency of 30MHz
SN74ALS569ADWR Applications
There are a lot of Texas Instruments SN74ALS569ADWR Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Binary counter/decoder
- Decade counter/decimal decode display (CD4017B）
- Divide-by"N" counters/frequency synthesizers
- Fixed or Programmable Frequency Division
- Counter control/timers
- ANALOG SIGNAL PROCESSING
- MULTIPLICATION
- Up Counters
- Divide-by-N counting
