SN74ALS573CDBR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ALS573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 24mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 2 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 27mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
SN74ALS573CDBR Overview
A package called 20-SSOP (0.209, 5.30mm Width) contains it. This package has the format of Tape & Reel (TR). It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. A temperature of 0°C~70°C is used for operation. This FPGA is part of the 74ALS series. There are 8 bits in this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family 74ALS573 includes it. In order to function, the supply voltage should be set to 5V. 20 pins are available on it. It is part of the family of electronic devices called ALS. This board has 20 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. 2 ports are available on this device. In the subcategory FF/Latches, this part belongs. The device is powered by 5V power supplies. An electronic circuit can be found on 8 input lines. This device is well suited for TR based on its reliable performance. With 24mA, maximum design flexibility is ensured. High efficiency requires maintaining the supply voltage at 5V. It also has characteristics of BROADSIDE VERSION OF 373. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 27mA.
SN74ALS573CDBR Features
20-SSOP (0.209, 5.30mm Width) package
74ALS series
8 Bits
74ALS573 family
20 pin count
20 pins
5V power supplies
SN74ALS573CDBR Applications
There are a lot of Texas Instruments SN74ALS573CDBR Latches applications.
- Frequency dividing
- Watches
- Automotive Body Electronics
- Serial Input
- Multi-line decoders
- Automotive ADAS
- Relay replacement
- Bus system register with enable parallel lines at bus side
- PCs and Notebooks
- Shift right with parallel loading
