Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
74ALS |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Additional Feature |
BROADSIDE VERSION OF 373 |
Subcategory |
FF/Latches |
Technology |
TTL |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74ALS573 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
24mA |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
14 ns |
Quiescent Current |
16mA |
Turn On Delay Time |
2 ns |
Family |
ALS |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
2.6mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
ENABLE LOW |
Number of Input Lines |
9 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ALS573CDW Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Tube is the packaging method. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is 0°C~70°C. It is a type of FPGA belonging to the 74ALS series. There are 8 bits in this electronic part. A device with this design has 20 terminations. As a member of the 74ALS573 family, it falls under that category. A 5V voltage supply is required for operation. The device is equipped with 20 pins. It is a member of the ALS family of electronic devices. 20 pins are used in its design. This electronic part is mounted in the way of Surface Mount. In this device, there are 2 ports. There is a subcategory of FF/Latches for this part. There are 5V power supplies attached to it. There are 9 input lines in which electronic circuits are present. The 24mA output current gives it maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. The current consumed by the device is 16mA volts in quiescent mode, which cannot be affected by external factors. The superior flexibility of this circuit can be attributed to the use of 8 circuits. There are also other characteristics of it, such as BROADSIDE VERSION OF 373.
SN74ALS573CDW Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS573 family
20 pin count
20 pins
5V power supplies
SN74ALS573CDW Applications
There are a lot of Texas Instruments SN74ALS573CDW Latches applications.
- Counting
- Parallel data storage
- Clocks
- Serial Input
- Multistage ripple counting
- Frequency dividing
- Digital bus buffer
- Up-Down Johnson
- Parallel-to-Serial Data Conversion
- OC-48 communication systems