Parameters |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.024 A |
High Level Output Current |
-2.6mA |
Low Level Output Current |
24mA |
Independent Circuits |
1 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
20 |
Weight |
500.709277mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
BROADSIDE VERSION OF 373 |
Subcategory |
FF/Latches |
Technology |
TTL |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Number of Circuits |
8 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
24mA |
Current - Output |
24mA |
Number of Bits |
8 |
Propagation Delay |
20 ns |
Turn On Delay Time |
2 ns |
Family |
ALS |
Logic Function |
D-Type, Latch |
SN74ALS573CDWRE4 Overview
In the package SOIC, it can be found. Tape and Reel is the way in which it is packaged. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations. It operates with a supply voltage of 5V. There are 20 pins on it. This electronic device belongs to the family of ALS. It is designed with 20 pins. Surface Mount is used to mount this electronic part. This device has a total of 2 ports. The part belongs to the FF/Latches subcategory. There are 5V power supplies attached to it. For maximum efficiency, the supply voltage should be set to 5V. The superior flexibility of the system is achieved through its use of 8 circuits. In addition, BROADSIDE VERSION OF 373 characterize it. 24mA represents the low level output current. It is set to zero for the high level output current. There should be a temperature below 70°C at which the system is operating. A temperature greater than 0°C should be used for operation. Voltages up to 5.5V can be supplied. With a voltage of 4.5V, it operates at its minimum capacity. A logic IC that is used in this application is BUS DRIVER. It features maximum flexibility in design due to 24mA output current.
SN74ALS573CDWRE4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74ALS573CDWRE4 Applications
There are a lot of Texas Instruments SN74ALS573CDWRE4 Latches applications.
- Counter timers
- Shift left register
- Automatic test equipment
- Serial Input
- Shift Registers
- Lamp and Display (LED)
- Sample and hold register
- Synchronous frequency dividers
- PCs and Notebooks
- Data acquisition