SN74ALS573CDWRG4
| Parameters | |
|---|---|
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -2.6mA |
| Low Level Output Current | 32mA |
| Control Type | ENABLE LOW |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 24mA |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 2 ns |
SN74ALS573CDWRG4 Overview
It is embedded in the SOIC package. Tape and Reel is the packaging method. The design of this electronic part is based on 8 bits. This device is designed with 20 terminations. The device is operated when the supply voltage is set to 5V. There are 20 pins on it. This electronic device belongs to the family of ALS. This board has 20 pins on it, which is what it is designed for. Surface Mount is the way in which this electronic part is mounted. As far as ports are concerned, this device has 2 ports. This part is included in FF/Latches. There are 5V power supplies attached to it. The device's reliable performance makes it a good choice for TR. In order to achieve high efficiency, the supply voltage should be kept at 5V. The superior flexibility of this circuit can be attributed to the use of 8 circuits. In addition to that, it is also characterized by BROADSIDE VERSION OF 373. 32mA is the low level output current. -2.6mA represents the high level output current. It is recommended to work at a temperature lower than 70°C. The operating temperature should be higher than 0°C. Voltages up to 5.5V can be supplied. With a voltage of 4.5V, it operates at its minimum capacity. There is a logic IC that it uses that is a BUS DRIVER. As the output current is 24mA, the design flexibility is maximum.
SN74ALS573CDWRG4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74ALS573CDWRG4 Applications
There are a lot of Texas Instruments SN74ALS573CDWRG4 Latches applications.
- Up/down difference counting
- Serial Output Register
- Parallel data synchronization
- Parallel Output
- Hammer
- Counter
- Parallel Input
- Communication systems
- General-Purpose Register
- Data acquisition
