Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Weight |
1.1991g |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
74ALS |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
TTL |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
74ALS573 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
24mA |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
14 ns |
Quiescent Current |
16mA |
Turn On Delay Time |
2 ns |
Family |
ALS |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
2.6mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
ENABLE LOW |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
5.08mm |
Length |
24.33mm |
Width |
6.35mm |
Thickness |
4.57mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ALS573CN Overview
A package called 20-DIP (0.300, 7.62mm) contains it. It is packaged in the way of Tube. It uses Tri-State as its output configuration. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. A 4.5V~5.5V voltage supply is required for operation. A temperature of 0°C~70°C is set as the operating temperature. In the 74ALS series, this FPGA is located. An electronic part with 8 bits is designed. This device is designed with 20 terminations. The family 74ALS573 includes it. It operates with a supply voltage of 5V. 20 pins are included. There is a device in this electronic family called ALS. In addition, it is designed with a pin number of 20. The electronic part is mounted using the Through Hole method. This device has a total of 2 ports. The part is in the FF/Latches subcategory. A total of 5V power supplies are needed to run it. There are 3 input lines in which electronic circuits are present. The 24mA output current gives it maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. It consumes 16mA current from its quiescent state without being affected by external factors at all. The circuit's superior flexibility is achieved through the use of 8 circuits.
SN74ALS573CN Features
20-DIP (0.300, 7.62mm) package
74ALS series
8 Bits
74ALS573 family
20 pin count
20 pins
5V power supplies
SN74ALS573CN Applications
There are a lot of Texas Instruments SN74ALS573CN Latches applications.
- Double bus register system
- Shift right register
- OC-48 communication systems
- Serial Output Register
- Stacked or Push-Down Registers
- Accumulator Registers
- Bus system register with enable parallel lines at bus side
- Pattern generators
- Flip-flops
- Buffer register