SN74ALS573CNSRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 24mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 2 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 27mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS573CNSRE4 Overview
It is embedded in the 20-SOIC (0.209, 5.30mm Width) package. It is packaged in the way of Tape & Reel (TR). It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. The operating temperature is 0°C~70°C. An FPGA in this series belongs to the 74ALS family. Electronic parts with 8 bits are designed for this application. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74ALS573 family. The device is operated when the supply voltage is set to 5V. It has 20 pins that makes it easy to use. This electronic device belongs to the family of ALS. The pin configuration of the device is 20. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports that can be connected to it. FF/Latches is the subcategory of this part. It operates from 5V power supplies. It consists of 8 input lines from which an electronic circuit can be built. Considering the reliability of this device, it would be a good candidate for TR. Due to its 24mA output current, it offers maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. BROADSIDE VERSION OF 373 are other characteristics of it. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 27mA.
SN74ALS573CNSRE4 Features
20-SOIC (0.209, 5.30mm Width) package
74ALS series
8 Bits
74ALS573 family
20 pin count
20 pins
5V power supplies
SN74ALS573CNSRE4 Applications
There are a lot of Texas Instruments SN74ALS573CNSRE4 Latches applications.
- Motor Drives
- Programmable binary
- Four-bit storage with output enable
- A/D and D/A conversion
- Shift register
- Control circuits
- Parallel data storage
- Pseudo-random code generators
- Clocks
- Serial Output Data Queuing
