SN74ALS575ADWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Additional Feature | WITH SYNCHRONOUS CLEAR |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS575 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 4 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 17mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS575ADWRE4 Overview
It is embeded in 24-SOIC (0.295, 7.50mm Width) case. A package named Tape & Reel (TR)includes it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Currently, the operating temperature is 0°C~70°C TA. It belongs to the type D-Typeof flip flops. The 74ALSseries comprises this type of FPGA. You should not exceed 30MHzin the output frequency of the device. A total of 1elements are present in it. Despite external influences, it consumes 17mAof quiescent current. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74ALS575. A voltage of 5V is used as the power supply for this D latch. Electronic devices of this type belong to the ALSfamily. This electronic part is mounted in the way of Surface Mount. This board is designed with 24pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This RS flip flops is a part number FF/Latches. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. An electrical current of 5V volts is applied to it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With an output current of 24mA, this device offers maximum design flexibility. As of now, there are 4input lines. Additionally, you may refer to the additional WITH SYNCHRONOUS CLEAR of the electronic flip flop.
SN74ALS575ADWRE4 Features
Tape & Reel (TR) package
74ALS series
24 pins
5V power supplies
SN74ALS575ADWRE4 Applications
There are a lot of Texas Instruments SN74ALS575ADWRE4 Flip Flops applications.
- Data transfer
- Automotive
- Frequency Divider circuits
- Divide a clock signal by 2 or 4
- Matched Rise and Fall
- Computing
- Shift Registers
- Clock pulse
- Common Clocks
- Differential Individual
