SN74ALS576BDW
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS576 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 3 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 18mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
SN74ALS576BDW Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. D flip flop is embedded in the Tube package. This output is configured with Tri-State, Inverted. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is operating at 0°C~70°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74ALSseries of FPGAs. In order for it to function properly, its output frequency should not exceed 30MHz. A total of 1elements are present in it. As a result, it consumes 18mA quiescent current and is not affected by external forces. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the 74ALS576 family. The power supply voltage is 5V. This D flip flop belongs to the family of ALS. There is an electronic part mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in Bus Driver/Transceiver. It is designed with 8bits. The D latch runs on a voltage of 5V volts. A D flip flop with 2embedded ports is available. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. The output current of 24mA makes it feature maximum design flexibility. The number of input lines is 3. Currently, there are 8 channels available.
SN74ALS576BDW Features
Tube package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS576BDW Applications
There are a lot of Texas Instruments SN74ALS576BDW Flip Flops applications.
- Parallel data storage
- Test & Measurement
- Data transfer
- Synchronous counter
- Count Modes
- Control circuits
- Supports Live Insertion
- Circuit Design
- Load Control
- Automotive
