SN74ALS577ANSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS577 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 4 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 18mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 30mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS577ANSRE4 Overview
The package is in the form of 24-SOIC (0.209, 5.30mm Width). Package Tape & Reel (TR)embeds it. The output it is configured with uses Tri-State, Inverted. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. Temperature is set to 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74ALSseries of FPGAs. You should not exceed 30MHzin the output frequency of the device. A total of 1 elements are present. It consumes 18mA of quiescent current without being affected by external factors. Terminations are 24. The 74ALS577 family contains it. Power is provided by a 5V supply. In this case, the D flip flop belongs to the ALSfamily. There is an electronic part mounted in the way of Surface Mount. A total of 24pins are provided on this board. It has a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. An electrical current of 5V volts is applied to it. The D flip flop is embedded with 2ports. As of now, there are 4input lines.
SN74ALS577ANSRE4 Features
Tape & Reel (TR) package
74ALS series
24 pins
5V power supplies
SN74ALS577ANSRE4 Applications
There are a lot of Texas Instruments SN74ALS577ANSRE4 Flip Flops applications.
- Event Detectors
- Computing
- Divide a clock signal by 2 or 4
- Matched Rise and Fall
- QML qualified product
- Bus hold
- Circuit Design
- Storage registers
- Synchronous counter
- Asynchronous counter
