SN74ALS577ANT
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74ALS577 |
| Function | Master Reset |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 4 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 18mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS577ANT Overview
The package is in the form of 24-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. There is a Tri-State, Invertedoutput configured with it. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis required for its operation. A temperature of 0°C~70°C TAis used in the operation. D-Typedescribes this flip flop. It belongs to the 74ALSseries of FPGAs. In order for it to function properly, its output frequency should not exceed 30MHz. In total, it contains 1 elements. As a result, it consumes 18mA quiescent current and is not affected by external forces. There have been 24 terminations. It is a member of the 74ALS577 family. It is powered from a supply voltage of 5V. This D flip flop belongs to the family of ALS. A part of the electronic system is mounted in the way of Through Hole. Basically, it is designed with a set of 24 pins. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. The design is based on 8bits. Its flexibility is enhanced by 8 circuits. A power supply of 5Vis required to operate it. The D flip flop is embedded with 2ports. For high efficiency, the supply voltage should be set to 5V. With a current output of 24mA , it offers maximum design flexibility. This input has 4lines in it.
SN74ALS577ANT Features
Tube package
74ALS series
24 pins
8 Bits
5V power supplies
SN74ALS577ANT Applications
There are a lot of Texas Instruments SN74ALS577ANT Flip Flops applications.
- Registers
- Test & Measurement
- Memory
- Differential Individual
- Guaranteed simultaneous switching noise level
- Communications
- Storage Registers
- Automotive
- Functionally equivalent to the MC10/100EL29
- Event Detectors
