SN74ALS580BDWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | BROADSIDE VERSION OF 533 |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS580 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Nominal Supply Current | 26mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Power Supply Current-Max (ICC) | 29mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ALS580BDWG4 Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. A package of Tube has been used. In its configuration, Tri-State is used as the output. The Logic type of this electrical device is D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. The operating temperature is 0°C~70°C. An FPGA of this type belongs to the 74ALS series. This electronic part is designed with 8 Bits. This device has been designed with 20 terminations available. The family 74ALS580 includes it. In order to operate it, the supply voltage must be 5V. 20 pins are available on it. In the world of electronics, this electronic device belongs to the family of ALS. There are 20 pins on it. A Surface Mount mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to the subcategory of FF/Latches. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. The system is powered by 5V sources. A supply voltage (Vsup) greater than 4.5V is required. Electronic circuits are represented by 8 input lines. The 24mA output current gives it maximum design flexibility. BROADSIDE VERSION OF 533 are also a characteristic of it. As its maximal power current (ICC) reaches 29mA, it is able to operate.
SN74ALS580BDWG4 Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS580 family
20 pin count
20 pins
5V power supplies
SN74ALS580BDWG4 Applications
There are a lot of Texas Instruments SN74ALS580BDWG4 Latches applications.
- Programmable binary
- Buffer Storage
- Counter timers
- Hammer Device Information
- Display
- Frequency dividing
- Counters
- Storage
- Parallel Input
- Accumulator Registers
