SN74ALS580BDWR
| Parameters | |
|---|---|
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 26mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 22 ns |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 533 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS580 |
| Pin Count | 20 |
SN74ALS580BDWR Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the way it is packaged. In its configuration, Tri-State is used as the output. This electrical device has Logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It is 0°C~70°C at the operating temperature. There are a number of FPGAs in this series, including this one. An electronic part with 8 bits is designed. In this device, there are 20 terminations. The family 74ALS580 includes it. With a supply voltage of 5V, it operates. The device is equipped with 20 pins. This electronic device belongs to the family of ALS. With the design of the board, there are only 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. There are 5V power supplies attached to it. Electronic circuits comprise 8 input lines. The reliability of this device makes it well suited to TAPE AND REEL. The 24mA output current gives it maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. There are also characteristics of BROADSIDE VERSION OF 533 associated with it.
SN74ALS580BDWR Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS580 family
20 pin count
20 pins
5V power supplies
SN74ALS580BDWR Applications
There are a lot of Texas Instruments SN74ALS580BDWR Latches applications.
- Up/down difference counting
- Up-Down Johnson
- Audio and video switching
- Serial Output Register
- Pseudo-random code generators
- Watches
- TV Set-top Boxes
- Communication systems
- Bus system register with enable parallel lines at bus side
- Accumulator Registers
