banner_page

SN74ALS580BN

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS580 20 Pins DUAL TTL 20-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALS580BN
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 754
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS580 20 Pins DUAL TTL 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Weight 1.1991g
Operating Temperature 0°C~70°C
Packaging Tube
Series 74ALS
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Termination Through Hole
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature BROADSIDE VERSION OF 533
Subcategory FF/Latches
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 1MHz
Base Part Number 74ALS580
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 26mA
Output Current 24mA
Number of Bits 8
Propagation Delay 18 ns
Turn On Delay Time 6 ns
Family ALS
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 2.6mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 29mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Translation N/A
Height 5.08mm
Length 24.33mm
Width 6.35mm
Thickness 4.57mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ALS580BN Overview


Package 20-DIP (0.300, 7.62mm) includes it. As a result, it has a packaging of Tube. There is a Tri-State output configured. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Through Hole method. A 4.5V~5.5V supply voltage is required to operate it. A temperature of 0°C~70°C is set as the operating temperature. In the 74ALS series, this FPGA is located. This electronic part is designed with 8 Bits. In this device, there are 20 terminations. As a member of the 74ALS580 family, it falls under that category. It operates with a supply voltage of 5V. 20 pins are included. In the world of electronics, this electronic device belongs to the family of ALS. 20 pins are used in its design. Electronic parts are mounted using the Through Hole method. In this device, there are 2 ports. Subcategory FF/Latches includes this part. There are 5V power supplies required for this machine to operate. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Due to its 24mA output current, it offers maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It also has characteristics of BROADSIDE VERSION OF 533. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 29mA.

SN74ALS580BN Features


20-DIP (0.300, 7.62mm) package
74ALS series
8 Bits
74ALS580 family
20 pin count
20 pins
5V power supplies

SN74ALS580BN Applications


There are a lot of Texas Instruments SN74ALS580BN Latches applications.

  • Shift right register
  • Buffer/Storage Registers
  • Serial Output Register
  • Counter
  • Multistage ripple counting
  • Network Switches
  • Double bus register system
  • Automatic test equipment
  • High-speed logic
  • Up-Down Johnson

Write a review

Note: HTML is not translated!
    Bad           Good