SN74ALS580BNSR
| Parameters | |
|---|---|
| Nominal Supply Current | 26mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 18 ns |
| Quiescent Current | 17mA |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Power Supply Current-Max (ICC) | 29mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS580 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
SN74ALS580BNSR Overview
A package called 20-SOIC (0.209, 5.30mm Width) contains it. A Cut Tape (CT) package is used to package it. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Electronic parts are mounted in accordance with Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. The operating temperature is 0°C~70°C. In the 74ALS series, this FPGA is located. It is designed with 8 bits. This device has been designed with 20 terminations available. 74ALS580 is the family name of it. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. ALS is the family name of this electronic device. In addition, it is designed with a pin number of 20. A Surface Mount mounting method has been used for this electronic part. As far as ports are concerned, this device has 2 ports. This part can be found within the FF/Latches subcategory. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. A total of 5V power supplies are required for it to operate. It is recommended to have a higher supply voltage (Vsup) than 4.5V. Electronic circuits are represented by 3 input lines. As a result of its reliable performance, it is well suited for TAPE AND REEL. It features maximum flexibility in design due to 24mA output current. Without external influences, it consumes 17mA of quiescent current. Maximum power supply (ICC) for its operation is 29mA.
SN74ALS580BNSR Features
20-SOIC (0.209, 5.30mm Width) package
74ALS series
8 Bits
74ALS580 family
20 pin count
20 pins
5V power supplies
SN74ALS580BNSR Applications
There are a lot of Texas Instruments SN74ALS580BNSR Latches applications.
- Frequency
- Phase comparator
- Timers
- Ring counter
- High-speed logic
- Lamp and Display (LED)
- Multistage ripple counting
- Four-bit storage with output enable
- Up/down difference counting
- Buffer/Storage Registers
