SN74ALS621A-1DW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| Subcategory | Bus Driver/Transceivers |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS621 |
| Pin Count | 20 |
| Output Type | Open Collector |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 33 ns |
| Turn On Delay Time | 39 ns |
| Family | ALS |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Current - Output High, Low | - 24mA |
| Logic Type | Transceiver, Non-Inverting |
| Max I(ol) | 0.024 A |
| Control Type | INDEPENDENT CONTROL |
| Translation | N/A |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ALS621A-1DW Overview
Logical driver uses a neat 20-SOIC (0.295, 7.50mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is - 24mA. Logical driver can deal with Open Collector output (s). All of the 1 elements are put into use. Digital buffer is one of the 74ALS series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic component belongs to the ALS family. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74ALS621" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under INDEPENDENT CONTROL control technology. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION to better serve the need. The fundamental operation of logical driver is based on 8 circuits.
SN74ALS621A-1DW Features
Bus Driver/Transceivers
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
SN74ALS621A-1DW Applications
There are a lot of Texas Instruments SN74ALS621A-1DW Buffers & Transceivers applications.
- Fiber distributed data interface (FDDI)
- Wireless teaching
- Point-to-point networking
- Precision engineering measurement
- Notebook
- Satellite ground stations
- Cell phones
- Tuner
- Wireless modems
- Wireless showroom
