SN74ALS641ADWR
| Parameters | |
|---|---|
| Packaging | Cut Tape (CT) |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH DIRECTION CONTROL |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS641 |
| Pin Count | 20 |
| Output Type | Open Collector |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 25 ns |
| Quiescent Current | 33mA |
| Turn On Delay Time | 32 ns |
| Family | ALS |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Current - Output High, Low | - 24mA |
| Logic Type | Transceiver, Inverting |
| Max I(ol) | 0.024 A |
| Control Type | COMMON CONTROL |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 47mA |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
SN74ALS641ADWR Overview
Logical driver uses a neat 20-SOIC (0.295, 7.50mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is - 24mA. Logical driver can deal with Open Collector output (s). All of the 1 elements are put into use. Digital buffer is one of the 74ALS series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. In the ALS family, the electric component belongs. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74ALS641" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 33mA. It is recommended to use a 5V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH DIRECTION CONTROL to better serve the need. 8 channels for high quality communication.
SN74ALS641ADWR Features
Bus Driver/Transceivers
WITH DIRECTION CONTROL
SN74ALS641ADWR Applications
There are a lot of Texas Instruments SN74ALS641ADWR Buffers & Transceivers applications.
- Satellite ground stations
- VoIP phones
- Wireless communication
- Pocket PC
- Point-to-point networking
- Cable network front end
- LAN, SAN, WAN (local, storage, work area networks)
- Car radio
- Remote controls
- Gigabit Ethernet
