SN74ALS666DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK |
| Subcategory | Bus Driver/Transceiver |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS666 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 73mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 32 ns |
| Quiescent Current | 40mA |
| Turn On Delay Time | 6 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS666DW Overview
A package called 24-SOIC (0.295, 7.50mm Width) contains it. Tube is the way in which it is packaged. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. Mounting this electronic component follows the Surface Mount method. The voltage supply is 4.5V~5.5V. A temperature of 0°C~70°C is set as the operating temperature. This FPGA is part of the 74ALS series. With this electronic part, there are 8 bits. This device has been designed with 24 terminations available. It is a member of the 74ALS666 family. The device works with a voltage of 5V for its supply voltage. With 24 pins, it is equipped. It is part of the family of electronic devices called ALS. It is designed with 24 pins. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. The part is in the Bus Driver/Transceiver subcategory. The device is powered by 5V power supplies. In the circuit, there are 8 input lines that are constituted by an electronic circuit. The output current of 24mA makes it feature maximum design flexibility. High efficiency requires a voltage supply of 5V. It consumes 40mA of quiescent current without being affected by external factors. There is also WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK characteristics to it.
SN74ALS666DW Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS666 family
24 pin count
24 pins
5V power supplies
SN74ALS666DW Applications
There are a lot of Texas Instruments SN74ALS666DW Latches applications.
- High-speed logic
- Synchronous frequency dividers
- Shift right with parallel loading
- Relay
- Digital bus buffer
- Control circuits
- Programmable binary
- Stacked or Push-Down Registers
- Storage
- Up-Down Johnson
