banner_page

SN74ALS667DW

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS667 24 Pins DUAL TTL 24-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ALS667DW
  • Package: 24-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 478
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS667 24 Pins DUAL TTL 24-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Frequency 1MHz
Base Part Number 74ALS667
Pin Count 24
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 79mA
Output Current 24mA
Number of Bits 8
Propagation Delay 20 ns
Turn On Delay Time 9 ns
Family ALS
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 400μA 8mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW/HIGH
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.65mm
Length 15.4mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-SOIC (0.295, 7.50mm Width)
Number of Pins 24
Weight 624.398247mg
Operating Temperature 0°C~70°C
Packaging Tube
Series 74ALS
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
Termination SMD/SMT
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK
Subcategory FF/Latches

SN74ALS667DW Overview


In the package 24-SOIC (0.295, 7.50mm Width), it can be found. A Tube package is used to package it. There is a Tri-State output configured. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. During operation, the temperature is set at 0°C~70°C. An FPGA in this series belongs to the 74ALS family. 8 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. As a member of the 74ALS667 family, it falls under that category. With the supply voltage set at 5V, it is able to operate. It is equipped with 24 pin count. It is a member of the ALS family of electronic devices. In addition, it is designed with a pin number of 24. The electronic part is mounted using the Surface Mount method. This device has 2 ports that can be connected to it. This part is included in FF/Latches. There are 5V power supplies required for this machine to operate. Electronic circuits are represented by 8 input lines. With an output current of 24mA, it is highly flexible in terms of design. The supply voltage should be maintained at 5V for high efficiency. It also has characteristics of WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK.

SN74ALS667DW Features


24-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS667 family
24 pin count
24 pins
5V power supplies

SN74ALS667DW Applications


There are a lot of Texas Instruments SN74ALS667DW Latches applications.

  • Hammer Device Information
  • Parallel-to-Serial Data Conversion
  • Double bus register system
  • Parallel data storage
  • Shift right register
  • Parallel Input
  • Counting
  • Automotive Body Electronics
  • Programmable binary
  • Registers

Write a review

Note: HTML is not translated!
    Bad           Good