SN74ALS667DWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALS667 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 79mA |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 9 ns |
| Family | ALS |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 400μA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ALS667DWR Overview
In the package 24-SOIC (0.295, 7.50mm Width), it can be found. A package of Tape & Reel (TR) has been used. It uses Tri-State as the output. This electrical device has the logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. With a supply voltage of 4.5V~5.5V, it operates. During operation, the temperature is set at 0°C~70°C. An FPGA in this series belongs to the 74ALS family. The design of this electronic part contains 8 bits. The device consists of 24 terminations that are designed to be used in conjunction with it. There is no doubt that it belongs to the family 74ALS667. The device works with a voltage of 5V for its supply voltage. There are 24 pins attached to it. In the world of electronics, this electronic device belongs to the family of ALS. This board has 24 pins on it, which is what it is designed for. Surface Mount is used to mount this electronic part. This device has 2 ports. In the subcategory FF/Latches, this part belongs. There are 5V power supplies required for this machine to operate. This device is well suited for TAPE AND REEL based on its reliable performance. The output current of 24mA makes it feature maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. A binary equivalent of the input line is generated by the 8 output lines. This object is composed of 1 elements. There is also WITH CLEAR AND PRESET; WITH DUAL OUTPUT ENABLE; WITH READ-BACK characteristics to it.
SN74ALS667DWR Features
24-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS667 family
24 pin count
24 pins
5V power supplies
1 elements
SN74ALS667DWR Applications
There are a lot of Texas Instruments SN74ALS667DWR Latches applications.
- Lamp and Display (LED)
- Data acquisition
- Counter control
- Shift left register
- Flip-flops
- Meter applications
- Communication systems
- Parallel Input
- Display driver
- Shift Registers
